Lassen Sie mich zunächst entschuldigen. Mein Deutsch ist nicht sehr gut, vor allem für technische Informationen, so dass ich dies schreibe in Englisch und mit Google Translate. Ich werde mit dem englischen anschließend Beitrag deutscher Übersetzung unter starten.
--------------------------------
Firstly, let me apologise. My German is not very good, especially for technical information, so I am writing this in English and using Google translate. I'll start with the English then post German translation below.
I have recently purchased a WBH Diag Pro chip and am having a little trouble setting it up. I think the problem is my wiring at the moment, so I won't go into details yet, but it made me come up with a good idea for a future version of the WBH Diag Pro firmware.
I would suggest adding a troubleshooting command in which you can set the ISO Tx pin high or low by a command, as well as read the current value on the ISO RX pin. This would help to troubleshoot wiring problems. You could set Tx high, probe your circuit, and read Rx, then repeat with Tx low.
In addition, this could be used to enable the spare pins on the device to be used as digital IOs.
I will be back if I cannot get it working correctly, but I think it's my wiring which is the problem for now so I'll carry on myself.
Regards Dr. Mouse
--------------------------------
Ich habe vor kurzem eine WBH Diag Pro Chip gekauft und bin mit ein wenig Mühe Einrichtung. Ich denke, das Problem ist meine Verkabelung im Moment, so werde ich nicht ins Detail gehen noch, aber es machte mir mit einem guten Idee für eine zukünftige Version des WBH Diag Pro Firmware.
Ich würde vorschlagen, das Hinzufügen einer Fehlerbehebung Befehl, in dem Sie die ISO-Tx Pin hoher oder niedriger durch einen Befehl kann, sowie der aktuelle Wert auf dem ISO RX-Pin. Dies würde helfen, die Verkabelung Probleme zu beheben. Sie könnten Tx hoch, erforschen Sie Ihre Schaltung und lesen Rx, dann wiederholen Sie mit Tx niedrig.
Zusätzlich könnte dies verwendet, um die Ersatz-Pins auf der Vorrichtung als digitale Vermittlungsstellen verwendet werden zu ermöglichen.
Ich werde wieder, wenn ich nicht arbeite daran gehen richtig, aber ich denke, es ist meine Verkabelung das ist das Problem jetzt also werde ich auf mich selbst zu tragen.
Grüße Dr. Mouse
|